139
Adjusting knitting machine 4
Basic settings
Adjusting yarn carriers:
1. Call up the "Yarn carrier" window.
In the default setting the yarn carriers are displayed in all knitting
areas
(SEN areas).
2. If only the yarn carriers of a certain SEN area are to be displayed, then
call
up "additional function keys" and tap the desired SEN area.
3. Tap the line (yarn carrier) that is to be processed.
Th
e number of the yarn carrier appears at the bottom edge o
f the
window, on the right of the "Adjusting yarn carriers" key.
4. Tap the "Adjusting yarn carriers" key.
5. Tap on the input field that is to be edited and enter the value.
6. Confirm
entries.
7. Return to the "Yarn carrier" window.
Further information:
Intarsia yarn carrier - Adjust stoppin
g point (basic setting, braking value)*
[228]
To Next Page
Loading...