141
Adjusting knitting machine 4
Basic settings
Further information:
Intarsia yarn carrier - Adjust stopping point (basic setting, braking value)*
[228]
V
Reduce carriage speed (n) for yarn carrier (n
= 0.
.3). The speed is reduced to 75% from
carriage reversal point until achievement of
the operating range of the yarn carrier.
Finally it can be chosen between the
following possibilities:
◆ 1 = Acceleration up to 100%
◆ 2 = Braking down to 50%, maintain
speed over a fabric width of 2 inches,
acceleration up to 100%
◆ 3 = Braking down to 50%, maintain
speed over a fabric width of 5 inches,
acceleration up to 100%
◆ 0 = Cancelling out of carriage speed
specific to yarn carrier
F
Activate or deactivate "Automatic tracking of
the yarn carrie
rs when widening".
If the distance between the yarn carrier and
the fabri
c selvedge is too small, then the yarn
carriers will be moved automatically
following the fabric selvedge.
Activate "Automatic tracking" (default
setting)
Deactivate "Automatic tracking"
Comment
Comment
ASCII Characters
Change engaging width (Ua, Ub)
For this call up the Y:Ua-b tab.
Explanation
Value range
To Next Page
Loading...