Stoll CMS 520 C+ - Page 161

161
Adjusting knitting machine 4
Basic settings
Further information:
 Working with files, libraries and folders [266]
WMC Set the speed control of the active
take-down system (main take-down or
comb take-down) to the value n (0-
32). If the take-down system turns too
quickly, the machine is stopped.
0= no stop motion, 1= insensitive, 32=
very sensitive
Minimum value: 0
Maximum value: 32
Step width: 1
WM+C Monitoring of main take-down. If the
take-down has not been used after n
(0-100) knitting rows, the machine will
stop. (0 = no supervision)
Minimum value: 0
Maximum value: 100
Step width: 1
WMK+C Controlling the comb. If the comb has
not moved after n (0-100) knitting
rows, the machine will stop. (0 = no
supervision)
Minimum value: 0
Maximum value: 100
Step width: 1
Comment Comment ASCII Characters
Explanation Value range