299
Adjusting knitting machine 4
Defining user profile
Change password From time to time you should change the password to be sure that it has not
become known. Carry out this activity on all knitting machines.
If the knitting machine is connecte
d with the STOLL pattern workstation, the
password can be changed simultaneously on all the knitting machines with the
help of on-line connection (see section "On-line commands" at the end of this
chapter).
Keys for Change password
Keys for "Change password"
Modify password:
1. Call up the "Service" window.
2. Call up "User profile" window.
3. Enter and confirm th
e password with the
keyboard.
4. Call up "Additional function keys"
5. Tap the "Change password" key.
Change pas sword wind ow
"Change password" window
6. Type in the new password in the top line.
7. Type in the new password again in the bottom line.
8. Confirm the password.
9. Call up "Main menu".
Key
Function
Call up the "Service" window
Call up "User profile" window
Confirm password
Call up "Additional function keys"
"Change password"
Call up "Main menu"
To Next Page
Loading...