415
Repairing the knitting machine 7
Replacing parts
Check the carriage part and th e needle bed
Check the carriage part and
the needle bed
1. Check the cams for damage.
Remove broken working butts of the movable parts (needle, coupling
part,
intermediate slider, and selection jack
).
2. Check the needle bed for damage.
Remove broken working butts of the movable parts (needle, coupling
part,
intermediate slider, and selection jack
).
If trick walls are damaged, they have to be repaired.
Further information:
Central lubrication - mounting
and working position [377]
Switching power supply 40 V off and on [375]
Do not remove metallic parts and fragments (e.g. broken
needle latch or hook) with a magnetic tool. There is a danger
that the needle bed or cams can be magnetized, leading to
incorrect selection.
To Next Page
Loading...