418
7 Repairing the knitting machine
Replacing parts
12. Place the yarn carriers in their starting positions.
13. Mount the carriage assembly panelling.
14. Mount the suction tube on the car
riage assembly.
15. If a central lubrication is present, swiv
el it into working position.
16. Switch on 40 V power supply.
17. Call up "Main menu".
18. Call up "Machine sta
rt" window.
19
. Tap the "SPF line fixed" key.
20. Start the machine with the engaging rod.
21. Only if the carriage assembly wa
s blocke
d: If the carriage stops after the
left reversion, set the needle selection to "On" in the "Machine start"
window.
22. Tap in "Machine start" window on key "SP from line 1" to start p
roduc
tion.
Further information:
Switching power supply 40 V off and on [375]
Central lubrication - mounting
and working position [377]
To Next Page
Loading...