Stoll CMS 520 C+ - Page 465

465
Repairing the knitting machine 7
Entering the data of the needle selection displacement manually
7. If the values are not identical to the data of the needle selection
displacement enter them manually (see next section).
8. Call up the "Main menu".
Entering the data of the
needle sel
ection
displacement manually
Keys for entering the data f or the needle selection displacement
Keys for entering the data for the needle selection displacement
 The machine is switched off.
1. To switch on the machine, set the main switc
h to 1.
 The "BootOkc" window is displayed on
the touch screen.
BootOkc window
"BootOkc" window
2. Touch the "Restart and Machine Configuration" key.
Key Function
Continue on to the next window
Call up "Additional function keys"
Open the "Needle bed parameters 2" window
Confirm input
return to the "Needle bed parameters" window