477
Software - Installation and basic settings 8
Boot process
My Network
Here are listed the computers that have been
defined in "My Network" field, see KnitLAN
connection [290].
If you wish to supplement the lists manually, take
note of the spelling when mul
tiple computers are
used:
\\computer name;\\computer name;\\computer
nam
e
As a separator between the individual computers
the semicolon (";") must be used.
User Name
This user must be familiar with his password in the
network so that the shared drives and folders can
be used.
Your Network administrator will create a user
name and a password for you so that you can
access the network resources.
Password
E-Mail
Input an e-mail address (Configure). The
messages of the control unit are sent to this
address, when the "Enable" check box is
activated.
IP Address
Each machine (computer) should have a unique
IP address within a network. The network protocol
TCP/IP communicates with the individual
machines by this IP address. The division of the
network is done in the so-called network classes.
An individual Network-address is assigned to each
machine automatically by the program and it is
displayed here.
Subnet Mask
This field is automatically filled up by the program
with a value for the shared network Class B.
Use DHCP
The DHCP (Dynamic Host Configuration Protocol)
enables with the help of a corresponding server
the dynamic allocation of an IP address and the
further configuration parameters to the computers
(machines) in a network.
MAC Address
Media Access Control Address.
Name
Name of the network board.
Label
Description
To Next Page
Loading...