500
8 Software - Installation and basic settings
Installing the Stoll operating system
Updating software 1. Call up the "Service" menu from the "Main menu".
2. Call up "Software updat
ing" window.
Software updating window
"Software updating" window
3. Select source folder.
If multiple Stoll operating systems are found on the data carrier,
these
are listed.
4. If several Stoll operating systems are listed, the Sto
ll operating system
(Type OS) that is to be copied should be marked.
5. Press the "Carry out update" key.
The ins
tallation files ar
e copied on the hard disk of the machine in a
separate storage location.
The "Update successfully installed" appears.
When searching for the Stoll operating system the selected
folder section and a section under this section (sub-folder
section) is also searched.
To Next Page
Loading...