75
Producing with the knitting machine 3
Preparing production and shift changes
Always set these settings before loading:
Key
Function
Delete previous pattern
Delete all yarn carrier positions
After the pattern is loaded, the function is automatically executed
"Start Program from Line 1". This means that you need not take the
"detour" over the window "Machine start" in order to start the knitting
program with the "SP from Line 1" key.
The "Activate EALL" function is only executed when a Sintral
file is loaded. Not only the entire previous pattern (Sin, Jac, Set)
is deleted from memory, but also the contents of cycle
counters, counters and NP values are reset to their home
position.
To Next Page
Loading...