76
3 Producing with the knitting machine
Preparing production and shift changes
Loading knitting program:
1. From the "Main menu" call up the "Load & Save" window.
2. Set the desired path with one of the "Direct pattern folder s
election" keys.
3. Use the PAT/SIN/JAC/SET/LIB keys to select whethe
r the entire pattern
of the current machine (PAT) or individual file types are to be listed.
4. Select a file from the file list by tapping it.
5.
Tap the "Load" key.
6. For the following prompt, press the "1" button to confirm,
- or
-
➜ tap the "0" key to cancel.
7. Ca
ll up "Main menu".
Loading the knitting program (difference Setup1-Setup2)
Setup1 or Setup2 You can quickly recognize whether it is a pattern with Setup1 or Setup2 data
A Setup2 pattern is saved in a zip file. The icon of compressed (zipped)
folder
is displayed in front of the pattern.
If the "Sintral Editor" window appears, the loaded knitting
program contains an error. Correct this error before you start
the production.
1
Setup1 pattern
2
Setup2 pattern
To Next Page
Loading...