Tektronix DPO70000 Series Programmer's Manual

Command Groups
Command
Description
CURVENext? Returns unique waveform data from a new
acquisition
CURVEStream Transfers continuously the w aveform data
from the inst
rument as it is acquired
DATa
Sets the for
mat and location of the waveform
data that is transferred with the CURVe
Command
Or returns t
he format and location of the
waveform data that is transferred with the
CURVe? command
DATa:DESTination Sets or returns the reference memory
location
for storing waveform data sent to
the instrument
DATa:ENCdg Sets or r eturns the format of outgoing
waveform data
DATa:FRAMESTARt Sets or queries the starting data frame for
wavefo
rm transfer
DATa:F
RAMESTOP
Sets or
queries the ending data frame for
waveform transfer
DATa:SOUrce Sets or returns the location of waveform data
transferred from the instrument
DATa:STARt Sets or returns the starting point in waveform
tran
sfer
DATa
:STOP
Sets
or returns the ending data point in
waveform transfer
WA VFrm? Returns WFMO utpre? and CURVe? data
for the waveform as specified by the
DA
TA:SOUrce command
WA
VFRMStream?
Re
turns WFMOU T PRE? and
CURVESTREAM? data for the w aveforms
specified by the DATASOURCE command
WFMInpre? Returns the waveform formatting
s
pecification to be applied to the next
incoming CURVE command data
WFMInpre:BIT_Nr
Sets or returns the number of bits per binary
waveform point
WFMInpre:BN_Fmt
Sets or returns the format of binary data for
the incoming waveform
WFMInpre:BYT_Nr
Sets or r eturns the binary field data width for
the first ordered waveform
WFMInpre:BYT_Or Sets or returns the byte order of waveform
points
WFMInpre:ENCdg Sets or returns the type of encoding for
incoming waveform data
2-70 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English