X35 Console Monitoring & Managing Files
10.13
3. (C) - this will allow the selected file to be
renamed.
4. (D) - this will delete the selected file(s).
5. (E) - if browsing a file in the X35 internal
memory
, clicking here will export a selected
file(s) onto a USB. If browsing files on USB
this will import selected file(s) from a USB
onto the X35 console.
a. A USB device must be connected to the
X35 console for this function to work.
b. When a job is selected this button is an
export job items icon. Select it and a
window will appear to select what you
would like to export. Highlight the options
you would like performed.
i. Export
Job - will export job files.
ii. Cr
eate Job Report - will launch job
report window. Refer to Section 9.3.5
- Exporting Job Report.
The Manager Toolbar (located at the bottom of the
window, provides the following functions, (refer to
Figure 10.24):
1. (F) - switches between X35 internal memory
and
the connected USB device.
a. When browsing files on a USB, the display
turns blue instead of grey.
2. (G) - this will backup all system data onto a
USB.
3. (H) - this will restore the entire inventory from
USB.
a.
Current inventory on the X35 internal
memory will be overwritten.
b. The system will restart.
c. This function can be used to restore
content from a backup USB.
4. (I) - will export diagnostic information onto a
USB
and can be used when your dealer asks
for it to assess the data.
Figure 10.25 - Job Export Options
F G H I JK
To Next Page
Loading...
