Wartsila RT-flex50-D - Page 393

Maintenance
6606−1/A1
RT-flex50-D
Wärtsilä Switzerland Ltd
3/ 7
⇒ Carefully draw the cooler out from the receiver over a length of approx. ’x’ =
750 mm by means of manual ratchet H
3
keeping the cooler in horizontal posi-
tion with spur-geared chain block H
2
.
⇒ Fit supports 94663a−IL and 94663b−IL to the left and right side of the receiver
frame.
⇒ Fasten both lugs 94663c−IL to the cooler.
⇒ Check length ’x
1
’ of safety chains 94663d:
− 1222 mm for SAC261 IL
− 1654 mm for SAC265 IL
Attention! Always hook both safety chains 94663d into lugs 94663c−IL!
I
94663a−IL
94663b−IL
H
3
C
I
WCH00115
x
94663c−IL
94663d
94663d
017.659/08
x
1
H
2
50−D / 2010
Removal and Fitting of Scavenge Air Cooler (with Integrated Lifting IL
)