Xerox WorkCentre 6605

Index
Phaser 6600 and WorkCentre 6605
Service Manual
I-4
R
registration
adjustment, 6-18 to 6-19
auto, scanner, 2-62
feed, 1-29
out of alignment, 3-24
parameter settings, 2-52
parts lists, 5-39
scanner parameter, 2-62
skew correction, 1-30
regulations
Canada, 1-16
FCC, 1-16
United States, 1-16
report
configuration, 2-33
E, H, & S Incident Report Form, A-7
error history, 2-90
health & safety incident, 1-14
printer settings, 2-34
resolution, 1-19
routine maintenance items
description, 1-55
part numbers, 5-63
rush current spec, 1-60
S
safety
incident reporting, 1-14
Safety Precautions
Power, 1-5
Safety Summary, 1-7
Scanner
cleaning, 6-4
maintenance, 2-61
parts list, 5-60
removal, 4-138
specifications, 1-79
wiring diagram, 7-51
sensor
bypass tray, 1-45
bypass tray no paper, 1-45
bypass tray no paper removal, 4-66
bypass tray, removal, 4-67
CCD image, 1-50
CTD, 1-41
CTD removal, 4-41
CTD, cleaning, 6-11
DADF cover open, 1-51
DADF document, 1-51
DADF duplex, 1-51
DADF scan, 1-51
exit, 1-31, 1-46
full stack, 1-46
fuser temp center, 1-43
fuser temp rear, 1-43
humidity/temperature, 1-36
no paper, 1-44
no paper, 550 Option, 1-48
regi, 1-44
regi, 550 Option, 1-48
scanner home position, 1-50
start of scan, 1-36
test, 2-23
waste toner full, 1-38
waste toner full removal, 4-23
serial number
format, 5-2
location, 5-2
service mode
diagnostic tests, 2-19 to 2-88
functions overview, 2-14 to 2-16
how to enter, 2-8
how to exit, 2-10
menu maps, 2-11
using diagnostics, 2-10
specifications, 1-57 to 1-83
DADF, 1-80
electrical, 1-60
environment, 1-70
FAX, 1-80
FPOT, 1-68
IIT (Scanner), 1-79
input capacities, 1-68
mechanical, 1-61
MFP clearance requirements, 1-65
operating modes, 1-66
output, 1-68
paper, 1-69
print image quality, 1-71
print resolution, 1-19
resolution, 1-66
running mode, 1-66
SFP clearance requirements, 1-64
warm-up time, 1-68