Chapter 72 RMON
OLT2406 User’s Guide
515
startup-alarm <startup-alarm>:
Specifies when the OLT should generate an
alarm regarding to the rising and/or falling
thresholds.
•
rising: the OLT generates an alarm if the
sampling value (or calculated value) is
greater than or equal to the rising threshold.
•
falling: the OLT generates an alarm if the
sampling value (or calculated value) is less
than or equal to the falling threshold.
•
risingOrFalling: the OLT generates an
alarm either when the sampling value (or
calculated value) is greater than or equal to
the rising threshold or when the sampling
value (or calculated value) is less than or
equal to the falling threshold.
rising-threshold <integer>: Specify an
integer for the rising threshold. When a value is
greater or equal to this threshold, the OLT
generates an alarm.
<rising-event-index>: Specify an event’s
index number (0~65535). The OLT will take the
corresponding action of the selected event for
the rising alarm. Set this to 0 if you do not want to
take any action for the alarm.
falling-threshold <integer>: Specify
an integer for the falling threshold. When a
value is smaller or equal to this threshold, the OLT
generates an alarm.
<falling-event-index>: Specify an
event’s index number (0~65535). The OLT will
take the corresponding action of the selected
event for the falling alarm. Set this to 0 if you do
not want to take any action for the alarm.
owner <string>
: Specify who should handle
this alarm.
C13
rmon event eventtable <index>
[description<string>]
Sets the RMON event table.
eventtable <index>: The event’s index
number in the event table (1~65535).
description<string>: owner | log | trap |
description
C13
rmon history historycontrol <1-
65535> buckets <1-65535> interval
<1-3600> port-channel <aid> [owner
<string>]
Sets RMON history configuration settings.
buckets <1-65535>: The number of data
samplings the network manager requests the
OLT to store.
interval <1-3600>: The time in seconds
between data samplings.
interface-id: The port that the OLT will poll
for data.
owner <string>: Specify who should handle
these historical network traffic statistics.
C13
Table 263 RMON Commands (continued)
COMMAND DESCRIPTION M P
To Next Page
Loading...
