ZyXEL Communications OLT2406 - Page 615

Chapter 85 Access Control
OLT2406 User’s Guide
615
snmp-server version <v2c|v3|v3v2c>
Sets the SNMP version to use for communication
with the SNMP manager.
v2c: allows SNMPv2 read/write access.
v3: allows SNMPv3 read/write access.
v3v2c: allows SNMPv2 and SNMPv3 read/write
access.
C13
snmp-server get-community
<property>
Sets the get community. Only for SNMPv2c or
lower.
C13
snmp-server set-community
<property>
Sets the set community. Only for SNMPv2c or
lower.
C13
snmp-server trap-community
<property>
Sets the trap community. Only for SNMPv2c or
lower.
C13
snmp-server trap-destination <ip>
[udp-port <socket-number>]
[version <v1|v2c|v3>] [username
<name>]
Sets the IP addresses of up to four SNMP
managers (stations to send your SNMP traps to).
You can configure up to four managers.
C13
no snmp-server trap-destination
<ip>
Deletes the specified SNMP manager. C 13
Table 323 SNMP Server Commands (continued)
COMMAND DESCRIPTION M P