Chapter 96 Remote ONT
OLT2406 User’s Guide
661
wan <id> [vlan <vid>] [priority
<priority>] nat
<disable|enable>] [username
<name>] [password <password>]
specified WAN connection:
• VLAN group
• Priority level
• NAT
• Internet information
wan-id: You can check the WAN ID of the WAN
connection that you want to configure in the
Advanced Application > ONT Quick Setup >
Wan screen.
vid: Enters an ID of the VLAN group that you
want the WAN connection to belong to.
priority: 0-7
username <name>: Enters the username for the
specified WAN connection.
password <password>: Enters the password for
the specified WAN connection.
C13
no wan <id | all>
Removes ONT WAN configuration.
id: 1-4
all: removes all ONT WAN configuration.
C13
Table 352 Remote ONT Commands (continued)
COMMAND DESCRIPTION M P
To Next Page
Loading...
