Chapter 96 Remote ONT
OLT2406 User’s Guide
662
option82 circuit-id option-
info <info>
Configures the DHCP option 82 circuit ID format.
The maximum length is 127 characters.
Note: When information is transformed to
circuit ID, the result will be shortened
to 127 characters.
info
: DHCP option82 circuit ID info is
composed of the following special characters
except % and space, that is ~`!@#$^&*()-
=_+{}<>?,./
%%: equals character %
%space: equals character space
%mac: client source mac
%hname: host device name
%slotid: slot index of the logic port
%pid: PON port index
%oid: ONT index
%ocid: ONT card index
%upid: UNI port index
%nnisvlan: SVLAN ID on network-network
interface
%snisvlan: SVLAN ID on service-network
interface
%snicvlan: CVLAN ID on service-network
interface
%sn: serial number of remote ONT
%shelf: shelf ID
%rack: rack ID
Note: For PON ports, the OLT uses the
following rules for DHCP option 82
configuration: (1) per system’s
format > (2) per ONT's option-info >
(3) per system's option and
information
C13
no option82 circuit-id
Disables DHCP option 82 circuit ID. C 13
Table 352 Remote ONT Commands (continued)
COMMAND DESCRIPTION M P
To Next Page
Loading...
