ZyXEL Communications OLT2406 - Page 668

Chapter 96 Remote ONT
OLT2406 User’s Guide
668
See Section 6.6 on page 87 for more information on how to upgrade ONTs to the latest firmware via the
OLT.
low-curr-thresh <0~79 | N/A>
Sets the lower laser bias current threshold.
Unit: mA
C13
low-rxpower-thresh <-127~0 |
N/A>
Sets the lower receive power threshold.
Unit: dBm
C13
low-temp <-40~100 | N/A>
Sets the lower temperature threshold.
Unit: celsius degree (°C)
C13
low-txpower-thresh <-15.3~6.5
| N/A>
Sets the lower transmit power threshold.
Unit: dBm
C13
low-volt-thresh <2.80~3.59 |
N/A>
Sets the lower power feed voltage threshold.
Unit: V
C13
up-curr-thresh <0~79 | N/A>
Sets the upper laser bias current threshold.
Unit: mA
C13
up-rxpower-thresh <-127~0 | N/
A>
Sets the upper receive power threshold.
Unit: dBm
C13
up-temp <-40~100 | N/A>
Sets the upper temperature threshold.
Unit: celsius degree (°C)
C13
up-txpower-thresh <-15.3~6.5 |
N/A>
Sets the upper transmit power threshold.
Unit: dBm
C13
up-volt-thresh <2.80~3.59 | N/
A>
Sets the upper power feed voltage threshold.
Unit: V
C13
exit
Leaves from the ONT alarm threshold
configuration profile.
C13
onu-model name <14 char> model-ID <0~8>
vendor-version <14 char> [software-
version <14 char>][card1 <1~254>...]
Creates an ONT model name, and configures
the following settings for the ONT:
•Model ID
• Vendor Version
• Software Version
•Card ID
C13
no onu-model all Returns all connected ONTs to the default
settings.
C13
no onu-model name <14 char> <cr> Returns the specified ONT to the default settings. C 13
no onu-model name <14 char> [card1
card2...]
Returns the card settings of the specified ONT to
default settings.
C13
onu-model help Provides more information about the specified
command.
C13
show onu-model <cr> Displays the following information of Zyxel ONT
products.
• Vendor Version
• Software Version
•Entity ID
E3
Table 352 Remote ONT Commands (continued)
COMMAND DESCRIPTION M P