ZyXEL Communications OLT2406 - Page 677

OLT2406 User’s Guide
677
Before creating traffic class rule, create a bandwidth group ID when you create the ONT. The traffic
class references the bandwidth group ID.
remote ont ont-5-1-3
sn 5A59584503005457
password 44454641554C542D3100
full-bridge disable
no inactive
bwgroup 1 usbwprofname 0MSir_0MAir_1GPir dsbwprofname 0MSir_0MAir_1GPir
This example creates 2 traffic classes (tc3 and tc4) on uniport-1-1 of ONT-5-1-3.
• Tc3 limits upstream and downstream rates to 20 Mbps.
• Tc4 limits upstream and downstream rates to 40 Mbps.
OLT2406 (config)# remote uniport uniport-5-1-3-1-1
OLT2406 (config-remote-uniport)# queue tc 3 priority 3 weight 0 USbwprofname 20m
DSBwprofname 20m dsoption olt bwsharegroupid 1
OLT2406 (config-remote-uniport)# queue tc 4 priority 4 weight 0 USbwprofname 40m
DSBwprofname 40m dsoption olt bwsharegroupid 1
This example removes traffic class “3”.
This example removes all traffic classes on uniport-1-1 of ONT-5-1-3.
OLT2406 (config)# remote uniport uniport-5-1-3-1-1
OLT2406 (config-remote-uniport)# no queue tc 3
OLT2406 (config)# remote uniport uniport-5-1-3-1-1
OLT2406 (config-remote-uniport)# no queue tc