ZyXEL Communications OLT2406 - Page 704

Chapter 102 PPPoE IA
OLT2406 User’s Guide
704
Continued:
Note: 1. If the options of [onuid] and
[uniport] are chosen at the same
time, system will only choose the
option [uniport] to avoid redundant
string of circuit-id/remote-id.
2. According to TR-101, the
maximum length of the circuit ID or
remote ID is 63 bytes.
C13
pppoe intermediate-agent
format-type help
Displays details about the pppoe
intermediate-agent format-type
commands.
C13
pppoe intermediate-agent vlan
<vlan-id> format-type circuit-
id string <string> <cr>
Configures and enables a PPPoE IA circuit ID
string for the specified VLAN on the specified
port.
C13
pppoe intermediate-agent vlan
<vlan-id> format-type remote-
id string <string> <cr>
Configures and enables a PPPoE IA remote ID
string for the specified VLAN on the specified
port.
C13
no pppoe intermediate-agent
trust
Removes the PPPoE IA trusted port setting from
the specified port.
C13
no pppoe intermediate-agent
format-type circuit-id
Removes the PPPoE IA circuit ID string for the
specified port.
C13
no pppoe intermediate-agent
format-type remote-id
Removes the PPPoE IA remote ID string for the
specified port.
C13
no pppoe intermediate-agent
format-type gpon-option
Removes the PPPoE IA settings for the specified
GPON port.
C13
no pppoe intermediate-agent
vlan <vlan-id> format-type
circuit-id
Removes the PPPoE IA circuit ID string for the
specified VLAN on the specified port.
C13
no pppoe intermediate-agent
vlan <vlan-id> format-type
remote-id
Removes the PPPoE IA remote ID string for the
specified VLAN on the specified port.
C13
pppoe intermediate-agent <cr>
Activates PPPoE IA on the OLT. C 13
pppoe intermediate-agent format-
type access-node-identifier string
<string>
Assigns a PPPoE IA string for identifying the
access node.
C13
pppoe intermediate-agent format-
type identifier-string string
<string>
option <sp|sv|pv|spv> delimiter
<#|.|","|;|/|" "|>
Configures a PPPoE IA identification string.
s: Slot
p: Port
v: VLAN
The delimiter is the separator between the spv,
like slot/port/vlan.
C13
pppoe intermediate-agent vlan
<vlan>
Activates PPPoE IA on the specified VLAN. C 13
pppoe intermediate-agent option82
vlan <vid> <cr>
Enables the PPPoE intermediate agent option 82
for the specified VLAN.
C13
Table 371 PPPoE Intermediate Agent Commands (continued)
COMMAND DESCRIPTION M P