Alcatel-Lucent OmniAccess 5740 User Manual

Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
111
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
The table below provides description for Syslog page.
Table 11: Syslog Field Description
Field Description
S
YSLOG
Logging: ENABLED Logging of messages is enabled
Edit Enable or disable syslog
Log Options
Watermark Maximum number of log messages that
can be stored in the buffer
Watermark in the range of 100-10000.
Buffered size Buffer size in the range of 4-16384. The
size of the buffer where logs are stored.
Log Type
Buffered If Buffered is enabled, it will store the
logs in the memory buffer. This will apply
for logs having severity equal or smaller
than the selected severity when enabled.
Console If Console is enabled, it will show logs on
the console. This will apply for logs
having severity equal or smaller than the
selected severity when enabled.
System If System is enabled, it will log the
system logs. This will apply for logs
having severity equal or smaller than the
selected severity when enabled.
Severity Levels of severity that can be set:
Emergencies, Alerts, Critical, Errors,
Warnings, Notifications, Informational,
and Debugging.
Enabled Select the check box to either enable/
disable log types.
Host Configuration
IP Address IP address of the host to which logs
should be sent.
Port Port number of the host.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English