Launching the GUI
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
7
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
LOGON TO USGM
The web interface is launched with the login page.
Step 1: Enter the default user name and password (superadmin/admin, admin) in
the User Name and Password fields.
Or
Use the AAA user name and password configured using the CLI to login to
USGM. (For more information on configuring AAA user name and password,
refer the note below.)
Step 2: This will launch the web interface to configure your OmniAccess 5740
USG.
Figure 1: Logon to USGM
Note: To enable AAA services on your system, enter the command aaa services in
configuration mode.
ALU(config)# aaa services
Establish authentication to new users by configuring new user accounts. To configure
new user account, use the following command:
username <user-name> {password [5] <password>|nopassword|
secret [5] <password>}
Example:
ALU(config)# username user1 password pass1
To Next Page
Loading...
Need help?
General
