Alcatel-Lucent OmniAccess 5740 User Manual

Configure
Left running head:
Chapter name (automatic)
212
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
C
REATING TRANSFORM SET
By default, a transform set ‘default’ is created in your system, and cannot be
edited or deleted.
Follow the procedure below to create a new transform set.
Step 1: Click New in the Transform Sets page to create a new transform set.
The fields to add name and encapsulation for transform set are populated.
Figure 133: VPN IPSec: New Transform Set
Step 2: Enter the name for the transform set.
The Transform Set name can be any alphanumeric name not exceeding 128
characters.
Step 3: Select the encapsulation.
The default encapsulation is esp-sha1-des and esp-md5-des. A maximum of four
encapsulations can be assigned for a transform set. The system prompts if more
than four encapsulations are selected.
Step 4: Click Apply to add new transform set, or Cancel return to transform set
page.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English