Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
185
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
ADDING INTRUSION RULE TO THE FIREWALL POLICY
Note: You need to configure the Intrusion Prevention settings prior to adding intrusion rule to
the firewall policy.
For more information on the procedure to configure intrusion prevention settings and
view intrusion prevention configuration status, see “Intrusion Prevention” section.
1. Click Intrusion Rules radio button for configuring Intrusion rule to the firewall.
2. Fields to add new intrusion rule is populated in the Intrusion Rule Configuration
table.
Figure 108: Firewall: Firewall Policy - Add New Intrusion Rule
3. Enter rule number, select match-list, sensor name, enter Threshold/Packets and
Threshold/Milli Sec, and select mode.
Threshold/Packets and Threshold/Milli Sec values are not mandatory.
4. Click Apply to add new intrusion rule.
5. Add as many rules as required.
To Next Page
Loading...
Need help?
General
