Maintenance
Left running head:
Chapter name (automatic)
282
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
R
EBOOT DEVICE
You can reboot the OmniAccess 5740 USG. Reboot has the same effect as power
cycling the chassis.
1. Click Reboot Device… to reboot the system. The following window is displayed
asking you to confirm the reboot.
Figure 180: Maintenance: Utilities - Device Reboot
2. You will be asked if you want to save the current configuration before rebooting. If
the information is not saved, any changes made since the system was last started
will be lost.
3. To save the current configuration, select the Save Running Configuration check
box.
4. Click Reboot.
5. Once the reboot is successful, USGM login page is displayed.
To Next Page
Loading...
Need help?
General
