Maintenance
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
305
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
SET OTHER PACKAGE AS DEFAULT PACKAGE
The package that comes with OmniAccess 5740 USG is always set as default
package.
If you install another package and would like to set that newly installed package as
default package, use the following procedure.
The system can have multiple application packages (like 3.0.0.80.0, 3.0.0.81.0).
The package being set as default should exist in the system.
1. Install a new package. Refer “Install Package” section to install new package. The
newly installed package is listed under Other Package table.
2. Click Set as Default icon under the Action column in Other Package table. This
opens Set as Default page.
Figure 201: Upgrade: Software Upgrade - Set as Default
3. Select Save Running Configuration check box to save the running
configuration. The device comes up with the current running configuration after
restart if this option is selected.
4. Click Yes to continue to confirm setting the selected package as default or click
No to cancel the operation.
To Next Page
Loading...
Need help?
General
