Alcatel-Lucent OmniAccess 5740 User Manual

Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
171
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
ATTACH NAT POLICY TO AN INTERFACE
Follow the procedure to attach a NAT policy on an interface.
1. Select the NAT policy to be attached on an interface from the NAT Policy Name
list.
2. Click Attach Interface in the Interface Bindings table. This populates fields to as
shown below:
Figure 99: Firewall: NAT - Attach NAT to an Interface
3. Select the interface in the Interface column.
The direction for the interface is set automatically when the interface is
selected.
4. Click Apply to add the selected NAT to the selected interface or click Cancel to
cancel the operation.
D
ETACH NAT FROM AN INTERFACE
1. Select the NAT from the NAT list.
Interfaces already bound to the selected NAT are displayed in Interface
Bindings table.
2. Click Detach icon in the Action column to detach the NAT from the selected
interface.
3. Confirm at the prompt to detach the NAT.
E
NABLE INTERFACE STATISTICS
1. Select the NAT from the NAT list.
Interfaces already bound to the selected NAT are displayed in Interface
Bindings table.
2. Click Enable Interface Statistics icon to enable interface statistics.
3. Click the same icon to disable interface statistics for a NAT policy.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English