Alcatel-Lucent OmniAccess 5740 - System Access - Syslog - Configure Syslog Parameters

Configure
Left running head:
Chapter name (automatic)
112
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
C
ONFIGURING SYSLOG PARAMETERS
Follow the procedure below to configure Syslog:
Figure 58: System Access - Syslog - Configure Syslog Parameters
Step 1: Enable Logging in the Syslog page.
By default, logging is enabled. If not, click Edit, check the Logging check box,
click Apply.
Step 2: Set log options in the Log Options table.
1. Click Edit to set the log options.
2. Set the watermark in the Watermark field.
3. Enter the buffered size in the Buffered Size field.
Severity The logs of the severity equal or smaller
is the sent to the host.
Action Provides option to delete the host
details.
Field Description