Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
113
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
The Log Options table lists log type, severity level, and enable status. There are
three log types: Buffered, Console, and System.
1. Select the log type for which you want to enable logging by checking the Enabled
check box.
2. Set any of the following severity levels for each of the log type in the Severity
drop-down list: Emergencies, Alerts, Critical, Errors, Warnings, Notifications,
Informational, and Debugging.
3. Click Apply to save the changes made to Log Options table.
A
DD HOST
Configure host details in the Host Configuration table.
1. Click New Host to configure new host.
2. Enter IP address in the IP Address field, port number in the Port field, and select
severity from Severity drop down list.
3. Click Apply to add new host.
E
DIT HOST
1. Click Edit icon in the Action column against the host that is to be edited.
2. Enter the new host details in the respective columns.
IP Address, Port, Severity details.
3. Click Apply to save changes, or Cancel to retain the original settings.
D
ELETE HOST
1. To delete any host, click Delete icon.
2. Confirm at the prompt to delete the host.
To Next Page
Loading...
Need help?
General
