Alcatel-Lucent OmniAccess 5740 - Quality of Service: Policy Map - New Traffic Class Policing Configuration - Excess Burst

Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
265
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
4. Select Excess Burst in the Police Parameters box. Excess Burst Parameters
fields are displayed as shown below.
Figure 171: Quality of Service: Policy Map - New Traffic Class Policing
Configuration – Excess Burst
• Check Excess Burst Parameters check box to set the excess burst
values.
• Set Excess Burst rate in the Excess Burst field. The default burst rate is
1500 bytes.