Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
57
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
EDIT VLAN INTERFACE
Follow the procedure given below to edit the VLAN configuration:
1. In the Interfaces page, click Edit All icon against the VLAN that needs to be
edited. Configure VLAN page is displayed.
Figure 30: Interfaces - Edit VLAN Configuration
2. VLAN ID is not editable.
3. If the IRB is enabled, the IP Address and Mask field displays the configured IP
address and mask. Modify if necessary.
4. Description given for the VLAN and the VRF associated with the VLAN is
displayed in the Description and VRF Forwarding fields. Modify if necessary.
Click Remove to remove the remove the associated VRF.
5. You can configure the secondary IP address for the VLAN interface in the
Secondary Address table.
Click New Secondary Address to add a new secondary address to the
selected interface. Fields to enter the IP address is populated.
• Enter the secondary IP address and subnet mask for the interface in the IP
Address and Mask column.
• Click Apply to add the secondary IP address, or click Cancel to cancel
adding secondary IP address.
• Click Delete icon in the Action column to delete the secondary address.
To Next Page
Loading...
Need help?
General
