Configure
Left running head:
Chapter name (automatic)
58
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
6. The Switch Ports table displays the switch ports configured for the VLAN
interface. You can edit/delete the switch ports configured.
Edit Switch Port
•In Edit icon against the switch port that needs to be edited. Switch Port
Configuring pop up window is displayed.
• Edit the Mode for the switch port. Click Accept or click Cancel to cancel the
operation.
Delete Switch Port
• Click Delete icon against the switch port to be deleted.
• The switch port gets deleted.
7. Click Add Port to add new switch ports.
8. After making the necessary changes, click Apply to save the changes or click
Cancel to cancel the operation.
EDIT STP CONFIGURATION
STP for a VLAN can be configured by selecting a particular VLAN in the Interfaces
page.
1. In the Interfaces page, click Edit STP icon for the VLAN interface whose STP
parameters is to be configured. STP Config page is displayed.
2. The VLAN ID for the selected VLAN is displayed in the VLAN ID field. This is not
editable.
3. Make the necessary changes and click Apply to save the changes or click
Cancel to cancel the operation.
DELETE VLAN INTERFACE
1. In the Interfaces page, click Delete icon in the Action column against the VLAN
to be deleted.
2. Confirm at the prompt to delete the VLAN.
To Next Page
Loading...
