Configure
Left running head:
Chapter name (automatic)
226
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
G
LOBAL SETTINGS
This page allows you to configure the IPS rules globally.
V
IEW GLOBAL SETTINGS
Step 1: From the USGM menu bar, click Configure. All submenu/links under
Configure are displayed in the left navigation panel.
Step 2: Click Intrusion Prevention sub-menu.
The Intrusion Prevention menu has six tabs: Status, Global Settings,
Signature Policies, Sensors, Alerts and Reports, and View Rule File.
Select the Global Settings tab. Global Settings page is displayed in the center
panel.
Figure 142: Intrusion Prevention: Global Settings
The table below provides field description for Global Settings page.
Table 26: Global Settings Field Description
Field Description
G
LOBAL SETTINGS
Intrusion Sensor Allows to select the intrusion sensor
type.
Group Type Allows to select the group type: Class
Type/Category/Priority
Class-type Table is displayed based on IPS classes.
Rule Indicates if the rule is used for
DETECTION or PREVENTION or
PREVENTION-RESET.
Status Displays if a specific rule is enabled or
disabled.
Action Provides an option to edit the IPS rules.
To Next Page
Loading...
