Monitor
Left running head:
Chapter name (automatic)
332
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
NAT
This page displays information about NAT policies. The Configured Rules table
displays the rules that have been configured. The Interface Bindings table
displays information about the interfaces to which the NAT policies have been
applied.
V
IEWING NAT STATISTICS
Follow the procedure below to view the NAT statistics.
Step 1: Launch the Web GUI tool.
Step 2: From the USGM menu bar, click Monitor. All submenu/links under
Monitor are displayed in the left navigation panel.
Step 3: Click Firewall and Security sub-menu.
The Firewall and Security has four tabs: Filters, NAT, DOS Attack and Firewall
Policy. By default, Filters tab is selected. Click the NAT tab.
Step 4: Select the NAT policy whose statistical information is to be viewed from
the NAT Policy Name drop down list. The NAT page displays the policy name,
type of policy, rules configured and the interface that the policy is applied to for the
selected NAT Policy.
Figure 218: Monitor: Firewall and Security - NAT
To Next Page
Loading...
Need help?
General
