Configure
Left running head:
Chapter name (automatic)
160
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
C
REATING SOURCE NAT (SNAT) POLICY AND CONFIGURE NAT RULE
Follow the procedure given below to create SNAT policy and configure NAT Rule:
Step 1: Click New NAT Policy in the NAT Policy page to create a new NAT
policy.
The New NAT Configuration page is displayed.
Figure 91: Firewall: NAT - New Source NAT Configuration
Step 2: Enter NAT name in the NAT Policy Name field.
Step 3: Select the NAT type as Source by selecting the Source radio button.
Step 4: Click Apply to create new NAT. NAT Rule Configuration page for the
new Source NAT you just created is displayed.
Step 5: Configure the NAT rule for selected rule type.
Select the NAT Rule Type: Static Address Translation (1:1), Address & Port
Translation or Bypass.
To Next Page
Loading...
