Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
153
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
CREATING A FILTER
Follow the procedure given below to create filter:
Step 1: Click New Filter in the Filters page to create new filter.
The New Filter page is displayed.
Figure 86: Firewall: Filters - New Filter
Step 2: Set the filter parameters in the Filter Params table.
1. Enter the filter name in the Filter Name field.
2. Select the default action for the filter from the Default Action drop-down list:
DENY/PERMIT.
3. Select the stateless filtering option from the Stateless drop-down list: YES/ NO
Note: You can configure time range for a filter. The option to add time range to the filter is
enabled in Edit Filter Params table. See “Edit Filter Parameters” section to configure
time range for the filter.
Step 3: Click Apply to add a new filter, or Cancel to cancel adding new filter.
To Next Page
Loading...
Need help?
General
