Alcatel-Lucent OmniAccess 5740 - DHCP Server - Add DHCP Pool - Options - Add Option

Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
85
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
3. Click Add to add an option to a pool. The following pop up window is displayed.
Figure 44: DHCP Server - Add DHCP Pool - Options - Add Option
4. Select the option to be added from the drop-down list, and enter the
corresponding value in the Value field.
5. Click OK. The option added to the pool is listed in the options tab. Add as many
options as required.
6. Click OK to save the DHCP pool options or click Cancel to cancel the operation.
Edit DHCP Pool Option
1. Select the option to be edited from the options listed in the Options tab. Click Edit.
Edit Option pop up is displayed.
2. Make the required changes and click OK to save the changes.
Delete DHCP Pool Option
1. Similarly, select the option to be deleted from the options listed in the Options tab.
Click Remove.
2. Confirm at the prompt to delete.
E
DIT DHCP POOL
To edit a DHCP pool, follow the procedure given below:
1. DHCP Server page displays the list of the DHCP pools configured. Select the
DHCP pool whose details are to be edited and click Edit.
2. Edit DHCP pool pop up window is displayed.
3. Make the required changes. The DHCP Pool name is not editable. Based on the
pool type selected, the network or the host radio button is not editable.
4. Click OK to save the changes.
D
ELETE DHCP POOL
To delete a DHCP pool, follow the procedure given below:
1. DHCP Server page displays the list of the DHCP pools configured. Select the
DHCP pool to be deleted, and click Delete.
2. Confirm at the prompt to delete.