Monitor
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
349
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
LOGS
This page displays the logs (like emergency logs, alerts, critical logs, errors, etc.)
based on the severity of the message. These logs enable you to take appropriate
action for smooth functioning of the system.
The severity of the log messages are indicated by priority, which varies from 0-7.
Lower the numerical value of priority, higher is the criticality of the message.
0 - emergency
1 - alert
2 - critical
3 - errors
4 - warnings
5 - notifications
6 - informational
7 - debugging
V
IEWING LOGS
Follow the procedure below to view the Logs.
Step 1: Launch the Web GUI tool.
Step 2: From the USGM menu bar, click Monitor. All submenu/links under
Monitor are displayed in the left navigation panel.
Step 3: Click Logs sub-menu. Logs page is displayed in the center panel.
Step 4: Select the log severity from the Select the Log severity drop-down list.
Log messages based on the selected severity and higher (numerically lower)
severities is displayed as shown below.
Figure 231: Monitor: Logs
To Next Page
Loading...
Need help?
General
