Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
81
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
CONFIGURE DHCP POOL
A pool is a collection of IP addresses maintained by the DHCP server for
assignment to DHCP clients. A pool can have only a single network or host
configured inside it, and is accordingly called a network or a host pool.
To configure a DHCP pool, follow the procedure given below:
Step 1: Click Add in the DHCP Server page.
Step 2: Add DHCP Pool window is displayed. This window has two tabs: DHCP
IP Addresses and Options. By default, DHCP IP Addresses tab is selected, and
its details are displayed.
C
ONFIGURE NETWORK POOL
1. Enter the name for the DHCP pool in the DHCP Pool Name field.
2. Select the VRF check box, and select the VRF from the drop-down list. If the VRF
name is specified, it configures the DHCP pool in the specified VRF. If the VRF is
not specified, the pool is configured for the Default VRF.
3. Under the pool type, select Network radio button. By default, Network is
selected. This allows you to specify the network to which the pool belongs to.
Figure 40: DHCP Server - Add DHCP Pool - Network
To Next Page
Loading...
Need help?
General
