Maintenance
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
301
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Install Package from Remote Site
1. Select Package at remote site radio button in the Package Installation Details
page.
Figure 197: Upgrade: Software Upgrade - Install Package from Remote Site
(a)
2. Select protocol from the Protocol list: HTTP/FTP/TFTP
3. Enter the IP address/host name of remote host in IP Address/Host Name field.
Entering port number of the remote site in the Port # field is optional.
4. Authentication at the remote site is optional. If remote site requires you to
authenticate, select the Authenticate check box. Enter the user name in the User
Name field and the password in Password field. Authenticate is applicable
only for HTTP/FTP protocol.
5. Enter the relative path of the package to be installed from the remote site in
Package Path field.
6. Click Continue or click Cancel to quit installing the package at any time.
• Clicking Continue verifies the package and leads to next page based on the
Package Type being installed, and also if the verification succeeds.
There can be two kinds of Package Type: Release and Component
Upgrade.
To Next Page
Loading...
Need help?
General
