Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
131
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
1. Add the DSCP.
Check the DSCP check box to add the DSCP. Provide the DSCP value in the
range between 0 and 63 or select the value from the drop-down list.
2. Add ToS (Type of Service)
Check the TOS check box; select the ToS value from the drop-down list.
3. Set the IP precedence level.
Check the IP-Precedence check box to set IP precedence level in the range
between 0 and 7.
4. Add fragments.
Check the Fragment check box to match the IP Fragment bit.
5. Select the type of traffic.
Check the Type check box to apply rule to the type of traffic. Select the type of
traffic from the list.
6. Define rule based on packet length.
Check the Length check box to apply rule based on the packet length.
Specify the length or length range between 1 and 1500. You have the option
to apply the rule for sizes greater than (GT), greater than or equal to (GE),
less than (LT), less than or equal to (LE), between the range (RANGE), or for
the fixed length (FIXED).
To Next Page
Loading...
Need help?
General
