Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
133
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
5. Select the type of traffic.
Check the Type check box to apply rule to the type of traffic. Select the type of
traffic from the list.
6. Define rule based on packet length.
Check the Length check box to apply rule based on the packet length.
Specify the length or length range between 1 and 1500. You have the option
to apply the rule for sizes greater than (GT), greater than or equal to (GE),
less than (LT), less than or equal to (LE), between the range (RANGE), or for
the fixed length (FIXED).
7. Apply rule based on source.
Check the From (Source Port) check box to apply rule based on source.
Select from the following options: RPC-PORTMAP, SMTP, SNMP,
SNMPTRAP, SSH, TELNET, TFTP, BGP, DNS, FTP, FTP-DATA, HTTP,
HTTPS, IMAP, POP2, POP3, GT, GE, LT, LE, RANGE, FIXED, NFS.
8. Apply rule based on destination.
Check the Service (Destination Port) check box apply rule based on
destination. Select from the following options: RPC-PORTMAP, SMTP, SNMP,
SNMPTRAP, SSH, TELNET, TFTP, BGP, DNS, FTP, FTP-DATA, HTTP,
HTTPS, IMAP, POP2, POP3, GT, GE, LT, LE, RANGE, FIXED, NFS.
9. Apply rule based on the session state.
Check the Established check box.
10. Apply rule based on the flagged traffic.
Check the Flag check box to apply the rule based on the TCP Segment Flag.
• Click Select next to the field. Flag window is displayed with the list of flags
available for selection.
• Select the flags to be included from the Available Flags column and click ‘>>’
button to move it to the Selected Flags column.
• Select as many flags from the Available Flags column and move it to the
Selected Flags column and click OK. The selected flag/s is displayed in the
Flag field.
To Next Page
Loading...
Need help?
General
