Configure
Left running head:
Chapter name (automatic)
162
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
3. Set External Mapping. This allows you to configure SNAT with host IP address, IP
address pool, and port range. This is optional.
Select the External Mapping check box to set the external mapping to the
NAT filter you are creating. This populates external mapping fields.
•Select Host radio button. Enter the IP address of the host in the IP Address
field.
•Select IP Pool radio button, select the list name from the Pool Name list.
•The Port Range radio button is disabled for Static Address Translation.
Note: If no address is configured, the IP address of the egress interface on which the NAT
policy is applied will be used.
If a SNAT policy with the pool configuration is attached to an interface, and at any
given point of time, the list is modified, you need to reapply the NAT policy on the
interface.
4. Click Apply to configure NAT rule for the newly created SNAT policy or Cancel to
return to the NAT Policy page.
To Next Page
Loading...
Need help?
General
