Configure
Left running head:
Chapter name (automatic)
164
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
3. Set External Mapping. This allows you to configure SNAT with host IP address, IP
address pool, and port range. This is optional.
Select the External Mapping check box to set the external mapping to the
NAT filter you are creating. This populates external mapping fields.
•Select Host radio button.
i. Enter the IP address of the host in the IP Address field.
ii. Configure SNAT with a port range by selecting Port Range check box.
Enter lower and upper port range values in the Lower and Upper fields.
This is optional.
•Select IP Pool radio button.
i. Select the list name from the Pool Name list.
ii. Configure SNAT with a port range by selecting Port Range check box.
Enter lower and upper port range values in the Lower and Upper fields.
This is optional.
• Select the Port Range radio button, enter lower and upper port range values
in the Lower and Upper fields.
If no port range is specified, a default port range of 2048 – 65535 is used.
4. Click Apply to configure NAT rule for the newly created SNAT policy or Cancel to
return to the NAT Policy page.
To Next Page
Loading...
Need help?
General
