Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
169
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
1. Set Priority/Rule Number.
Check the Priority/Rule Number check box to set the priority number for the
rule to be applied. Higher the number, higher is the priority.
2. Select the match-list. Select the match-list from the Match List field in the Match
List box.
3. Set Internal Mapping. This allows you to configure a DNAT with host IP address or
an IP address pool.
•Select Host radio button.
i. Enter the IP address of the host in the Host IP field.
ii. Configure port number for a DNAT by selecting Port check box. Enter the
port number. The range for the port is 1-65535. This is optional.
•Select Pool radio button.
i. Select the list name from the Pool Name list.
ii. Configure port number for a DNAT by selecting Port check box. Enter the
port number. The range for the port is 1-65535. This is optional.
4. Click Apply to configure NAT rules for the newly created DNAT policy or Cancel
to return to the NAT Policy page.
To Next Page
Loading...
Need help?
General
