Configure
Left running head:
Chapter name (automatic)
180
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
Step 2: Enter the TF policy name in the Policy Name field.
Step 3: Select the protocol type from the Protocol list.
By this, you are configuring non-IP packets to be bridged across the transparent
firewalling interfaces. By default, IP and ARP protocols are configured as pass-
through protocols.
Step 4: Select the incoming interface from the In Interface list. This configures
the TF feature on the interface.
Step 5: Select the outgoing interface from the Out Interface list. Interface
attachment is mandatory.
Step 6: Click Apply to add the new TF policy, or Cancel to cancel the operation.
E
DIT TF POLICY
1. Click the Edit icon in the Action column against the TF policy to be edited.
2. Make the required changes. Policy Name cannot be modified.
3. Click Detach to detach the interfaces attached to the TF policy, if required.
4. Click Apply to save the changes or Cancel to cancel the operation.
D
ELETE TF POLICY
1. Click Delete icon in the Action column against the TF policy to be deleted.
2. Confirm at the prompt to delete TF policy.
To Next Page
Loading...
Need help?
General
