Configure
Left running head:
Chapter name (automatic)
234
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
DELETE RULE IN A SENSOR
1. Click Edit icon in the Action column against the sensor for which you want to
delete the rule/firewall policy.
Editing an Existing Intrusion Sensor page is displayed.
2. Click Delete icon in the Action column against the firewall policy to be removed in
Associate Firewall Policy table.
3. Confirm at the prompt to delete the rule/firewall policy from a Sensor.
D
ELETING A SENSOR
1. Click Delete icon in the Action column against the Sensor you want to delete.
2. Confirm at the prompt to delete the Sensor.
Note: A Sensor assigned to a Firewall Policy cannot be deleted. To delete a Sensor
associated with a Firewall Policy, disassociate the Sensor from the Firewall Policy and
then delete.
To Next Page
Loading...
Need help?
General
