Alcatel-Lucent OmniAccess 5740 - Page 45

Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
35
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
• Enter the channel number in the Channel Number field.
• Enter the range of the time slots that can be associated with the E1 controller in
the Time Slot field. (Time slot can also be provided in ‘a-b’ format. E.g, 1-2)
• Select the speed from the Speed drop down list. Default speed is 64 kbps.
• Click OK. The channel group thus configured is displayed under the Channel
Group Configuration table. Repeat this procedure to configure more channel
groups.
Step 4: Click Apply to save the E1 Controller configuration or click Close to
return to the Interfaces page.
Step 5: The channel-group thus configured forms the channelized serial
interface, and is displayed in the Interfaces page.
Note: You can configure encapsulation on a channelized serial interface. See “Configure
Channelized Serial Interface” for more details on this.